Discover our product
Pressure relief valve DN12
Pressure relief valve DN12
481 135 12 10/2A; 481 135 12 10/2B
FATA500/50(S) (according GB/T 25974.3-2010) - China market
The pressure relief valve of series 481 135 with DN12 connection is designed for application in hydraulic legs of powered roof supports, in the yielding systems of the canopy support ram and other rams, in accordance with the
hydraulic system specification, where it is required to discharge the working medium out of the powered roof support unit. The valve is intended to protect the ram against excessive pressure increase in the overand/ or underpiston areas. The operation principle of the pressure relief valve is based on the classic design of the piston with rows of holes, slidably mounted in the connection, with the pressure setpoint adjustment by means of a helical spring. The working medium flows out to the environment (outside the contour of the powered roof support unit) via a conduit. The design of the valve is not intended to be connected to the return line of the hydraulic system.
| Technical parameters | ||
|---|---|---|
| Nominal diameter of the main piston | mm | 7,5 |
| Sealing type of the main piston | – | glyd rings |
| Pressure setting range for A version Pn | MPa | 30-40 |
| Pressure setting range for B version Pn | MPa | 40-50 |
| Max. flow at setting 50 MPa (GB/T 25974.3-2010) | l/min. | <500 |
| Construction version | – | stainless steel/brass |
| Recommended filtration | µm | 40 |
| Mounting connection | – | DN12 |
| Total weight of the valve A version | kg | 1,48 |
| Total weight of the valve B version | kg | 1,5 |
The valve can operate with using HFA fire-resistant fluids (oil-in-water emulsions) with a concentrate content of 0.5–3%, based on mineral and synthetic oils compliant with the PN-C-96047 standard. If other operating fluids (mediums) have to be used, it is required to valve manufacturer.
